AsymmetryEngineering
Contact us
A part printing on a gantry-style 3D printer

01 · You already have the model

Custom 3D printing

Send an STL, STEP, 3MF or OBJ file and we'll print it. Before printing, we check wall thickness, overhangs and print orientation (so layer lines don't run through the load-bearing section), and let you know if we'd recommend any changes.

  • One-off prototypes through to short runs of fifty or so
  • Material advice to suit the job
  • Post-processing: support removal, sanding, heat-set inserts, threaded fasteners
  • Printability report on the file before you commit
  • Metal printing on request, in stainless steel, titanium, aluminium and tool steel
A curved surface shown as a CAD wireframe mesh

02 · You have an idea

3D modelling & CAD

Describe the part, sketch it on paper, or show us the space it needs to fit. We model it in parametric CAD so the dimensions stay editable. If version two needs a hole moved 4 mm, it's a quick edit.

  • Parametric solid modelling with a clean, editable feature tree
  • Assemblies and fit checks against existing hardware
  • Dimensioned drawings to ISO 2768-m if you need them for manufacture
  • You receive the native file and a STEP file, and the model is yours to keep
A scanner sweeping a line of light across a part on a turntable, turning it into a point cloud

03 · You have the broken original

Reverse engineering

Obsolete, discontinued, or snapped in half? Send us the part (or the pieces) and we'll measure it up and rebuild it as an accurate model. If the original failed because of a design weakness, we'll usually strengthen that section in the new version.

  • Digital calipers and thread gauges for hard dimensions; scanning for organic shapes
  • Failure review: what broke and why, before we reprint it
  • Reinforcement where the original was under-designed
  • Fit confirmed against your hardware before the final print
A dimensioned engineering drawing of a bracket

04 · Your file won't print properly

Design for additive manufacture

A model that looks right in CAD doesn't always print well. We fix files that are failing, warping or coming out weak in the wrong direction, and explain what to change next time.

  • Mesh repair: non-manifold edges, flipped normals, self-intersections
  • Reorientation and part splitting to get strength in the right direction
  • Fillets, chamfers and draft added where the print needs them
  • Tolerance and clearance sizing for parts that have to fit together

Process

How a job runs

Same five steps whether it's one part or a large batch. You approve before we print, and we communicate with you every step of the way to make sure you get exactly what you need.

01

Enquiry

You send what you have: a file, sketch, photo, or a description with the key dimensions.

02

Quote

Fixed price and lead time back, usually within 1 business day. Material and finish confirmed here.

03

Model

Design or file prep, then a render or a cross-section for you to sign off. Two revisions are included.

04

Print

Printed, supports removed, finished by hand and dimensionally checked against the model.

05

Ship

Photos before it's packed, then posted Australia-wide or picked up in Perth. Files sent on delivery.

Materials

Available Materials

Engineering thermoplastics for most jobs, and metal when a part needs it. Not sure which suits? Tell us what the part has to do and we'll recommend one.

Thermoplastics
MaterialBest forMax service tempUV / outdoor
PLADisplay pieces, fine detail, prototypes~55 °CPoor
PETGGeneral-purpose parts, brackets, enclosures~75 °CFair
ABS / ASAHousings and trim; ASA for anything in full sun~95 °CVery good (ASA)
ABS-ESDStatic-safe jigs, fixtures and electronics housings~95 °CPoor
TPUGaskets, bump stops, flexible mounts~70 °CFair
PCImpact resistance and structural clarity~115 °CFair
PA-CFStiff load-bearing parts and wear surfaces~120 °CGood
PPA-CFHigh-temperature structural parts, under-bonnet~150 °CGood
PPS-CFChemical resistance and continuous heat~200 °CVery good
PEEKExtreme heat, chemicals and wear; can stand in for metal~240 °CFair
PEKKHigh-temperature structural parts; inherently flame retardant~240 °CFair

Service temperatures are indicative for printed parts under light load. Tell us how the part will be used and we'll recommend a material. Glass-filled (GF) and carbon-filled (CF) grades of most of the above are available too, plus soluble supports (PVA, BVOH) for complex internal geometry. PPA, PPS, PEEK and PEKK are quoted per job; they're slow and expensive to print, so we only recommend them when a part needs them.

Metals
Metal · on requestBest forWhy choose it
316L Stainless SteelCorrosion-resistant functional parts, marine and wet environmentsTough and ductile, excellent corrosion resistance
Titanium TC4 (Ti-6Al-4V)Lightweight, high-strength brackets and structural partsBest strength-to-weight, corrosion resistant
Aluminium AlSi10MgLight housings, heat sinks, thin-walled partsLow weight, good thermal conductivity
Tool SteelTooling inserts, dies, wear and cutting partsHigh hardness and wear resistance

Metal parts are quoted per job and take longer than thermoplastics. It's usually only worth it when heat, load or wear rule out plastic, and we'll let you know if a thermoplastic will do the job.

Enquiry

Tell us about your idea

The more details the better, and the faster we can give you a quote.

What do you need? *

Have a file? Send the enquiry first and we'll reply with a link to upload STL, STEP or 3MF files. Nothing you send is shared or reused.